I have had very good luck using MER in Seattle for my Isuzu engine parts. They know the C240 (which I have on my HC 38T) very well. Here is the link to their website; http://www.merequipment.com/. Their tollfree number is 1-800-777-0714.
Byron
Izuzu Engine Parts
7 posts
• Page 1 of 1
Izuzu Engine Parts
by skomadina » Sat Mar 08, 2008 2:39 am
- skomadina
- Cabinboy
- Posts: 25
- Joined: Mon Apr 02, 2007 5:57 pm
MER is COOL
by johnnysuede » Sun Mar 09, 2008 5:55 am
Don't bother with anywhere else. Talk to Norm at MER . He got me the original Isuzu gaskets for the Manifold.
- johnnysuede
- Crew
- Posts: 115
- Joined: Mon Jul 10, 2006 7:24 am
Non Marinized
by johnnysuede » Sun May 18, 2008 5:53 am
I also use rockauto.com. Go to a 1981 Chevy LUV Pickup select Diesel. Good for gaskets , starter, waterpump i.e. the non-marinized stuff Use MER for marinized. 
- johnnysuede
- Crew
- Posts: 115
- Joined: Mon Jul 10, 2006 7:24 am
Another Source
by johnnysuede » Tue Jun 03, 2008 8:30 pm
I found I had the wrong waterpump from RockAuto and they did not have the correct one. I called Southwest Products Corp 2760 Junipero Avenue
Signal Hill, CA 90755, Phone: 562.424.0913. They are a very large distributor of Isuzu Industrial/Marine parts. I read them the part number and they had it . It seems the engine block changed in 10/1979 and I had the old one. The Chevy Luv truck was not imported until 1981 so the 'Old' pump is not generally available as an auto part.
Signal Hill, CA 90755, Phone: 562.424.0913. They are a very large distributor of Isuzu Industrial/Marine parts. I read them the part number and they had it . It seems the engine block changed in 10/1979 and I had the old one. The Chevy Luv truck was not imported until 1981 so the 'Old' pump is not generally available as an auto part.
- johnnysuede
- Crew
- Posts: 115
- Joined: Mon Jul 10, 2006 7:24 am
Also Industrial Generator,LiftTruck
by johnnysuede » Mon Nov 23, 2009 11:49 pm
I have also had luck on parts with MQPower (they know it as DCA25SSIU)
They have a spin-oil filter adapter. Also for starters use only OEM from industrial lift trucks (powered by C240). Also Hyster and Thermo King use C240. here is a source for new OEM starter
mascostartersandalternators.com
Don't buy re-built its crap. So if its strong enough for Lift-truck duty it's good enough for us
They have a spin-oil filter adapter. Also for starters use only OEM from industrial lift trucks (powered by C240). Also Hyster and Thermo King use C240. here is a source for new OEM starter
mascostartersandalternators.com
Don't buy re-built its crap. So if its strong enough for Lift-truck duty it's good enough for us
- johnnysuede
- Crew
- Posts: 115
- Joined: Mon Jul 10, 2006 7:24 am
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests